Furnace Repair starts with finding the actual cause.
Clear answers and fast repairs when your furnace will not start, heat evenly, or stay running. Similar symptoms can have very different causes, which is why we inspect the affected system before recommending work. Haha's explains the findings in plain language and gives you the available choices before an approved repair or installation begins.
Signs It is Time to Schedule Service
- Cold air from the vents, no heat at all or a furnace that will not stay lit
- Short cycling, clicking, banging or a blower that never stops
- A rising gas bill or rooms that no longer heat evenly
If you smell gas, see a yellow or flickering burner flame or your carbon monoxide alarm goes off, leave the home and call the gas utility and emergency services before anything else.
What Can Cause the Problem?
No-heat calls often come down to a dirty flame sensor, a failed igniter, a tripped limit switch from poor airflow, a bad blower motor or capacitor, a failed control board or a clogged condensate line on high-efficiency models. A cracked heat exchanger is a safety issue and is handled separately.
How We Diagnose Furnace Repair
We read the furnace's error code, then watch the startup sequence: inducer, igniter, gas valve, flame and blower. Along the way we check the filter, airflow, venting and safety switches so a repeat shutdown does not follow the repair.
- 1ListenWe document what changed, when it began, and whether the problem is intermittent.
- 2TestWe check the system in a logical order and verify the failed condition.
- 3ExplainYou receive the findings, pricing factors, and practical options.
- 4CompleteApproved work is performed, tested, and the work area is cleaned.
Repair, Installation, and Cost Factors
Repair or replace depends on the unit's age, the failed part and whether a heat exchanger or safety issue is involved. A newer furnace with a sensor or igniter problem is a clear repair. An old unit with a cracked exchanger usually is not.
Pricing depends on the part, access and labor, and we explain it before work starts. The $89 diagnostic fee is waived with an approved repair.
Built for Kansas City Conditions
Cold snaps in the Kansas City area push furnaces to run for hours at a time, which exposes weak igniters, clogged filters and tired blower motors. If your furnace quits on a freezing night, call us right away.
